InstaTints User Manual

Thoroughly clean your window with soapy water and dry completely after cleaning with a lint-free towel.

Peel the first side of the tape and cut out thin adhesive strips from the included roll and affix them approximately ½ inch from the top edge of the glass. (see diagram)

Peel the adhesive backing from one side of your tint.

Carefully slide your InstaTints into the window seal and make sure your tint is aligned with the top of the glass.

Alternate Method: If you find it difficult - or if the tint is not sliding behind the window seal - lower the window to the bottom, which should provide you enough room to position the tint between the glass and the window seal mounted to the door. Insert the tint into the space such that the top of the tint is approximately 5 inches below the frame (or where the window would be fully extended). You should now be able to raise the window up behind the tint without difficulty.

Gently press your InstaTints against the adhesives on your glass.

Roll down your windows to ensure functionality.

To remove: Start at the top corner and give it a gentle pull!

To reapply: Just slide your InstaTints back in and make sure to adhere to the adhesives.